Products
 

 

MicroKill Ag Forte 

10240

 

Innovative disinfectant/oxidizing agent for efficient remediation of mould, bacteria, virus, yeast, protozoa and alga etc.

 

MicroKill Ag Forte is a ready-to-use disinfectant (oxidizing agent) with an outstanding effect on mould, bacteria, virus, yeast, protozoa, alga etc.
MicroKill Ag Forte is simple and safe to use. During disinfection only oxygen (O2) and water are released. The product components left, are invisible and nontoxic. MicroKill Ag Forte releases no toxic fumes and is not cancer-causing or mutagenic. In connection with mould remediation and disinfection after water and sewage damage, etc. the oxidizing power of MicroKill will also eliminate odours.

 

Odourless - unproblematic processing without unpleasant smells

MicroKill is 100% free of chlorine substances including chlorine dioxide and therefore releases no chlorine odour or other unpleasant smells. The fact that MicroKill is odourless is an advantage when treating/spraying in residential areas and other places where you may fi nd people who can be sensitive to chemical exposure such as children and elderly persons.
MicroKill does not develop harmful gases by accidental mixing with acidic liquids, as is the case with chlorine-based disinfectants. Although MicroKill is odourless, the user must wear personal protective equipment, for example when spraying or wet-fogging large areas. 

 

Product Data

The active ingredient of the product is the environmentally friendly hydrogen peroxide that, in a comprehensive process, has been stabilized and enhanced catalytically in its effect against microorganisms using silver (Ag). This results in a proliferation of the disinfecting effect compared to normal hydrogen peroxide (H2O2).
The elementary oxygen (O2) released by hydrogen peroxide, attacks the mould cell walls by direct contact. Since oxygen reacts chemically with cell wall molecules, these will be impacted and degraded, leading to an immediate cell death and thus to a destruction of the treated mycel (mould).

 

Fields of application

Disinfection of interior and exterior surfaces. On walls, ceilings, facades and roofs infested by mould. Can be applied to plaster, wood, paint, concrete, sand lime brick, brick walls, plasterboard, wallpaper and concrete roof tiles and bricks attacked by mould. Use MicroKill as a disinfectant in institutions, private homes, food industry etc.


Application

Use the MicroKill sprayer or other suitable spraying equipment.
MicroKill is suitable for use in ULV wet-foggers:
Flex-A-Lite 2600 CE-EP, Fogmaster Tri-Jet 6208 or PulsFOG

 

Off-gassing test from eurofins available.

 

Disinfectant – ready for use against moulds, virus and bacteria, etc.
Available in 10 litre containers.
Minimum order 2 x 10 litre.

 

Product data sheet UK

Product data sheet NL

 Safety data sheet NL

Eurofins off-gassing test NL

 

About MicroKill

  

   

 

 

Concrobium Mold stain Remover cMsR – Mold stain Remover – Oxidant

 

Concrobium® Mold Stain Remover is an innovative 2-component mould stain removal system designed to help restoration professionals complete jobs more effectively and more profi tably. The unique, non-foaming solution quickly and easily removes the toughest mould stains on a long range of surfaces, and is the ideal choice for professional mould remediators:

 

• Unmatched efficacy – high oxidizing power removes mould stains from surfaces, renewing their appearance.
• Easy to use – requires no scrubbing and no clean-up; just wet the surface and allow to dry! Cleans most surfaces
   in a single application.

• No harmful chemicals – contains no chlorine or other harmful chemicals. The active substance that is generated when
   you mix the two components with water, is a mild form of the extremely effective oxidant peracetic acid. Peracetic acid
   is often used in food production. After use the product breaks down into oxygen and water.

 

After cleaning/stain removal with CMSR, spray/fog the surface with Concrobium Mold Control. Concrobium Mold Control encapsulates the residual bio-material, leaving a breathable fi lm which prevents regrowth/recolonization of mould on exposed surfaces. 

 

CMSR1  Concrobium Mold Stain Remover 

Net weight 1157 grams/set. Coverage approx. 28-37 m2

 

CMSR2  Concrobium Mold Stain Remover 

Net weight 394 grams/set. Coverage approx. 9-14 m2

 

 

 

  Concrobium info UK

  Concrobium info NL

  Safety data sheet - part 1

  Safety data sheet - part 2

 

About Concrobium

 


 

NAC Europe - Ellegårdvej 18 - 6400 Sønderborg - Danmark - Tel. 74 42 62 92 - info@nac-europe.com